Functions:

1. 4 wired and 12 wireless defense zones;
2. Can store 6 users’ numbers: system will call these numbers automatically;
3. Can store 3 SMS numbers: system will send alarming SMS to these 3 numbers automatically;
4. 10-second ISD automatic message recording;
5. Built-in artificial intelligent digital voice announcer;
6. Built-in artificial intelligent English message;
7. Support Two-way intercom (built-in speaker);
8. Users can make calls by using keypad on alarm panel, just like a telephone;
9. One-key-control function, Out Arm, Home Arm, Remote Arm;
10. SOS, fire, gas, door, hall, window, balcony, and perimeter places alarm;
11. Real-time, Delay, 24 hours, bypass defense zones programming function;
12. Wireless learning code, easy to add additional wireless accessories;
13. You can call system number anywhere via telephone or mobile phone to remote control system arm, disarm, monitor, etc.
14. E2PROM information protection can protect the information from loss after power off;
15. Built-in NI-HI rechargeable battery to provide continuous surveillance.

Technical Parameters:

• Input Voltage: DC12V/1A
• Standby Current: <55mA
• Alarming Current: <450mA
• Wireless Frequency: 315MHz, 2262/4.7MΩ
• GSM Frequency: 900/1800/1900MHz
• Back-up Battery: NI-HI AAA*6  DC7.2V
• Siren Volume: 110dB

Operation Instructions:

• Remote Controller Operation
  Users can use remote controller to set system as Out Arm, Home Arm, Emergency Alarm, Real-time Disarm and etc.
   
• Out Arm
  It means to guard all around your house while everyone is going out; all the detectors of the host are always working; when the detector is triggered by detecting source (anti-theft, fire prevention, gas leak, etc.), the alarm system will sound the alarm.
• Home Arm
  It means, for the safety, while somebody is at home, you need to enable the peripheral door, window, balcony and perimeter detectors of the alarm system while prevent from triggering the indoor detectors, which may cause improper warning; then, you shall select Arm at Home, let just part of the detectors work and disable the other parts.
• Disarm
  It means to stop the alarm when the main unit sounds the alarm or make the alarm system in the state of non-warning. After disarming, even if you trigger the detector, the main unit would not sound alarm (excluding 24-hour defense areas and emergency button on the remote control) and the [Arm] indicator goes out.
• Answer Alarming Call
  When the main unit sounds alarm, it will dial the preset numbers. If no one answers the call, the system will call the next user number automatically. The system will call each preset numbers for 3 times in order.
• Remote Control by Phone
  Dial the number associated to the alarm main unit by phone (mobile phone), and after one ringing cycle, you can hear a voice prompt “Please enter password”. If the password is right, you will here “Press 1 to arm, Press 2 to disarm, Press 3 to Monitor, Press 4 to intercom”. If the password is wrong, you will hear a prompt voice to ask you to input the password again.
• Emergency Help
   
• Delete Alarming Memory
   
• System Dialing Function

Item Includes:

• 1 x GSM Alarm Host
• 2 x Remote Control
• 1 x Wireless PIR motion sensor
• 1 x Magnetic door/window contact
• 1 x GSM antenna
• 1 x Adapter